Your Cart
Your cart is empty
Continue shopping
Using Our Ink Is As Easy As 1,2,3
- Buy the ink & paper from us or from one of our authorized distributors.
- Buy a new eco tank printer. We HIGHLY recommend the EPSON Sure Color F170 sublimation printer GET THE PRINTER HERE
- Fill the tanks & load the Electrum Ecostencil paper into the paper tray and start printing highly detailed stencils!
- For more tips and tricks make sure to join the Eco Stencil Support group on Facebook here.
FAQ
What Do Our Artists Say
I cut stencil prep from 45 minutes to 5. The print is razor sharp and the transfer didn’t budge during a full-day session
Dereck S
Fine-line portraits finally look like the reference. No fuzzy edges on the paper and the lines transferred clean on the first pass.
Jack F
One 4 oz bottle printed thousands of stencils. It paid for itself in the first month and the consistency is unreal.
Andrew P
The paper grabs the ink evenly with zero ghosting. Stencil held through heavy wipe downs and still read crisp at the end.
Collins M
Setup was simple. Followed the guide, filled the EcoTank, and we were printing same day. Every artist on my team gets identical results.
Harris K
Bold liners, tiny script, dotwork grids. Everything prints clean and transfers clean. Clients notice how precise the stencil looks
Richard Q
Watch The Video To Learn How To Set Up Your New Eco-Tank Printer With Our Ecostencil System
To Troubleshoot Electrum ECO Stencil Ink issues with an Epson EcoTank printer
- Perform a Printhead Cleaning
- Use a cleaning solution:
- Gather an inkjet cleaning solution, a syringe, gloves, and a folded shop towel. - Access the print head.
- Open the printer and slide the print head to the side, placing the folded towel underneath it to catch any ink. - Flush the print head
- Attach the syringe filled with cleaning solution to the print head and slowly press the plunger, repeating until the print head runs clean on the towel. - Reassemble and test
- Reattach the cartridges
- Move the print head back to its original position
- Run a power cleaning cycle from the printer's utility settings.
Try the "Color Hack"
- Identify the issue - If you're getting faint stencils, the black ink tank may be blocked.
- Change stencil color - In your design software (like Photoshop), change the stencil's color to a dark green, which uses a mix of yellow and cyan inks.
- Adjust print settings - Set the printer to use high quality, select color printing, and print the stencil. This can produce a bold stencil by bypassing the blocked black tank.
Prevent Future Issues
- Print regularly - Print a test page at least once a week to keep the ink nozzles wet and flowing.
- Avoid low ink levels - Refilling ink tanks when they are very low can suck debris into the printhead, causing blockages.
- Keep heads clean - Regular maintenance and printing are the best ways to prevent clogging.
Save Time On Stencilling
- Faster setup and cleaner lines
- Long-lasting hold through sessions
- Lower cost per stencil over time
- Consistent results across artists and studios
